Connectors: Host Side

eSATA

One eSATA

FireWire

Two 9-pin FireWire800 (1394B)

FireWire

One 6-pin FireWire400 (1394A)

USB

One USB Mini-B (5 pin, USB2.0 high/full/low speed)

DC Input

DC In A: 4-pin male "drive power" connector
DC In B: 5-pin Mini-DIN connector for use with Tableau TP2 power supply

Connectors: Device Side

SATA

SATA Signal Connector

IDE

IDE Signal Connector

DC Output

4-pin male "drive power" connector (power to SATA or IDE hard disk)

Switches

DC Input Select

Selects between DC In A and DC In B Sources
(functions as source ON/OFF when one DC In source connected)

DIP Switch

4-position DIP switch selects field-configurable options
(DIP Switches can be accessed by removing a knock-out panel on the side of the T35e case)

Other Features

Status LEDs

8 LEDs: DC IN A good, DC In B good, Power ON, IDE drive detected, SATA drive detected, Host connected, Write-block enabled, Drive activity

Factory Configuration

Black Paraben case units are configured as read-only (model T35e)

Compatibility

SATA Devices

SATA 1 or SATA 2 hard disk devices

IDE Devices

Parallel ATA hard disk devices with LBA (Logical Block Addressing) support

Host Interface

FireWire800/400 or USB 2.0

Host O/S

Windows XP/2000/newer, Macintosh OS X, most Linux distributions (note: Linux distributions have varying levels and quality of support for FireWire 1394 A/B and USB2.0)

Physical / Environmental

Power

3.5 watts typical operating (not including hard disk)

Supply voltage (DC IN A/B)

+5VDC @ 2A, +12VDC @ 2A (includes budget for hard disk)

Output voltage (DC OUT)

+5VDC @ 1A, +12VDC @ 1A

Dimensions

5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H)

Weight

5.4oz (153g)

Operating temperature range

0 to 55 degrees C (no airflow)

Storage temperature range

-40 to 70 degrees C

Relative humidity

Up to 90% (non-condensing)

Warranty

One years parts and workmanship from date of purchase