|
Connectors: Host Side | |
eSATA | One eSATA |
FireWire | Two 9-pin FireWire800 (1394B) |
FireWire | One 6-pin FireWire400 (1394A) |
USB | One USB Mini-B (5 pin, USB2.0 high/full/low speed) |
DC Input | DC In A: 4-pin male "drive power" connector
DC In B: 5-pin Mini-DIN connector for use with Tableau TP2 power supply |
|
Connectors: Device Side | |
SATA | SATA Signal Connector |
IDE | IDE Signal Connector |
DC Output | 4-pin male "drive power" connector (power to SATA or IDE hard disk) |
|
Switches | |
DC Input Select | Selects between DC In A and DC In B Sources
(functions as source ON/OFF when one DC In source connected) |
DIP Switch | 4-position DIP switch selects field-configurable options
(DIP Switches can be accessed by removing a knock-out panel on the side of the T35e case) |
|
Other Features | |
Status LEDs | 8 LEDs: DC IN A good, DC In B good, Power ON, IDE drive detected, SATA drive detected, Host connected, Write-block enabled, Drive activity
|
Factory Configuration | Black Paraben case units are configured as read-only (model T35e) |
|
Compatibility | |
SATA Devices | SATA 1 or SATA 2 hard disk devices |
IDE Devices | Parallel ATA hard disk devices with LBA (Logical Block Addressing) support |
Host Interface | FireWire800/400 or USB 2.0 |
Host O/S | Windows XP/2000/newer, Macintosh OS X, most Linux distributions (note: Linux distributions have varying levels and quality of support for FireWire 1394 A/B and USB2.0) |
|
Physical / Environmental | |
Power | 3.5 watts typical operating (not including hard disk) |
Supply voltage (DC IN A/B) | +5VDC @ 2A, +12VDC @ 2A (includes budget for hard disk) |
Output voltage (DC OUT) | +5VDC @ 1A, +12VDC @ 1A |
Dimensions | 5.75 in. (L) x 3.25 in. (W) x 1.125 in. (H) |
Weight | 5.4oz (153g) |
Operating temperature range | 0 to 55 degrees C (no airflow) |
Storage temperature range | -40 to 70 degrees C |
Relative humidity | Up to 90% (non-condensing) |
|
Warranty | One years parts and workmanship from date of purchase |
|
